Back to blogs

    When an overnight wait is a billable layover charge

    By TransportOne Editorial Team•November 17, 2026•7 min read
    A tractor trailer running a two lane highway at dusk with its marker lights on.

    A driver checks in at your Fresno DC at 15:40 for a 16:00 appointment. Receiving tells them the dock is three trucks deep and the next open door is 07:00 tomorrow. They shut down in the lot. Two weeks later the invoice carries $250 of detention and a $250 layover against that same stop.

    Most AP teams pay both, because both rates match the tariff. A layover charge is a flat per-day fee for holding a truck and driver out of service overnight when the load can't be worked until the next day. Detention is an hourly fee for time at the dock. The two price different things, and the rate confirmation rarely says what happens when a wait becomes a night.

    Detention runs on hours, layover runs on days

    J.B. Hunt publishes the cleanest version of that boundary we've seen. In its Carrier 360 accessorial schedule, detention begins two hours after the arrival check call, accrues in 15 minute increments at $50 an hour when check calls update automatically, $40 when they're keyed by hand, and stops at five hours. Past five hours at the stop, the charge becomes a layover at $250 a day. The schedule says plainly that a stop paid layover will not also be paid detention.

    Copy that structure into your own accessorial addendum even if you never tender them a load. It fixes the handoff point and turns "was this detention or layover" into arithmetic rather than a phone call. What a detention charge audit has to establish is a separate question.

    Flat rates themselves aren't controversial. ATS puts standard dry van and flatbed layover at $250 to $300, and heavy haul or specialized moves at $500 to $1,000 a day. FreightCourse reports a $200 to $500 range, and notes driver layover pay usually starts once a delay passes 24 hours, so a carrier's internal trigger and the one on your invoice can sit a day apart.

    DetentionLayover
    How it accruesHourly, in 15 minute blocks after the free windowFlat, per 24 hours of lost service
    Published rate$50 an hour automated, $40 manual$250 a day, up to $1,000 for heavy haul
    What settles a disputeGate in and gate outThe on-duty start and the next door offered

    Our position, and it costs us arguments with analysts: when a stop produces one clock, pay the layover. Two hundred fifty dollars for a truck that sat in your yard until morning is honest money for capacity you consumed, and an hour spent fighting it costs more than the line. The charge worth refusing is the second clock on the same stop.

    The hours of service clock decides whose night it was

    Under 49 CFR 395.3, a property-carrying driver's 14 hour window opens when they come on duty after 10 hours off, and it runs on wall clock time. Sitting in your lot doesn't pause it. Inside that window the driver gets 11 hours of driving, and once it closes they need another 10 consecutive hours off before turning a wheel.

    So the word overnight is a little misleading. What converts a wait into a layover is the 14 hour window closing while the truck sits at your gate, which is a fact recorded on the driver's log. Your dock schedule doesn't settle it.

    Check the on-duty start, not just the appointment

    Take the Fresno driver. On duty at 05:00 means the window ends at 19:00. They pulled in at 15:40 with three hours and twenty minutes left, enough to load and get down the road. Your backed-up dock took the night. Approve it.

    Now change one number. On duty at 03:00 puts the window out at 17:00, and the next shipper is a three hour run. A door at 16:00 doesn't save that night. The layover was set when dispatch took a load the driver couldn't finish, and those we deny, with the hours arithmetic in the denial.

    This is the step teams skip. They approve layover off the appointment record and the carrier's note, and never ask for the on-duty start, the one field separating a facility-caused layover from a dispatch-caused one. Carriers will hand it over; it's sitting on the ELD.

    What a layover charge has to show

    Six things belong in the file before the line gets funded:

    • The appointment time on the tender, the next slot the facility offered, and who offered it.
    • Arrival and departure times from something other than the carrier's billing system: your gate log, a geofence crossing in your visibility feed.
    • The driver's on-duty start for that day.
    • The party that caused the miss. A dock running three hours behind is your charge. A truck that rolled in after the receiver closed is not.
    • The layover rate from the rate confirmation, or the published schedule as it stood on the ship date rather than the version on their site today.
    • Something showing the tractor stayed committed to your load overnight.

    The last one catches more than you'd expect. A driver released from your yard at 17:12 who tenders at another shipper in Lathrop at 21:40 did not lay over on your freight. The proof is already in your feed; it goes unchecked because by the time the invoice lands the trip record is closed. Keeping the shipment exception tracking record alive through billing turns that into a ten second check. The same record tells you whether an appointment slot you couldn't get is what turned a short wait into a night.

    Four layover lines we send back

    The stacked stop is the most common by far: five hours of detention and a layover billed against the same arrival. Under a conversion rule those hours already sit inside the day rate.

    Then there's the night rounded into two days. Arrival 23:30 Monday, released 08:30 Tuesday, billed as two layover days because two calendar dates appear on the paperwork. A layover day is 24 hours of lost service. That one is nine hours.

    Third, layover on drop trailer freight. The tractor dropped and left, so no driver was held and no capacity was lost. If the trailer then sat for a week, that's trailer rent or per diem, which is a different code on a different line.

    Fourth is a carrier-caused miss dressed up as a facility problem. Truck arrives 18:10 for a 14:00 appointment at a receiver that shuts at 17:00. Gate scan plus tender settles that one, assuming anyone looks.

    The email that actually resolves it

    Short disputes get paid. Three facts, in this order: the charge code and amount, the record that contradicts it with its timestamp and source, and the amount you're paying instead.

    Invoice 44821, layover $250 on stop 2 (Fresno, 11/04). Our gate scan has the tractor in at 11:57 and out at 17:12 on 11/04, and our tracking feed places the unit loading at a shipper in Lathrop at 21:40 the same night. No overnight hold against this load. Paying detention on 3.25 hours past the two hour free window at $50, $162.50. Declining the layover line.

    No argument about industry practice, no paragraph about partnership. A carrier's AR clerk can approve or escalate that in under a minute, which is the entire point. Penny drafts that note with the timestamps pulled, and drafts it ahead of the payment run, which is the difference between a line you never funded and a credit memo you chase for two months. The timing is the whole case for auditing freight invoices before payment.

    Food and beverage shippers hit this hardest in our experience: appointment-driven DC receiving with tight compliance scoring converts more waits into nights than drop-and-hook manufacturing freight.

    Run this against your own invoice file

    Pull every invoice from the last two quarters carrying a layover code. Group by stop, then count how many of those stops also carry a detention line on the same date. That overlap is the fastest money in the accessorial file, because the contradiction lives inside the invoice. No carrier conversation, no evidence hunt, just two lines that can't both be true.

    The harder pass comes after: of the layovers that survive, count the ones whose on-duty start would have closed the driver's window no matter what your dock did. Do that before you accept that your appointment grid is the problem. Book a walkthrough if you want both passes run against your own layover lines.

    Frequently asked questions

    What is a layover charge in trucking?
    A layover charge is a flat per-day fee a carrier bills when a driver and truck are held out of service overnight because the load can't be loaded or unloaded until the next day. It pays for a lost day of capacity rather than for time spent at a dock. ATS puts standard dry van and flatbed layover around $250 to $300, with heavy haul and specialized moves running $500 to $1,000 a day.
    What is the difference between layover and detention?
    Detention is billed hourly after a free window, usually two hours, and covers waiting at the facility. Layover is a flat daily charge that applies once the wait runs past the point where the driver can still complete the move that day. J.B. Hunt's published Carrier 360 schedule draws the line at five hours: detention accrues up to that cap, after which the charge becomes a layover at $250 a day.
    Can a carrier bill detention and layover on the same stop?
    Under most schedules that define a conversion point, no. J.B. Hunt's accessorial schedule states that a stop paid layover will not also be paid detention. If your contract is silent on the point, write the rule in, because an invoice carrying both codes against one arrival is billing the same wait twice.
    How do hours of service rules affect a layover claim?
    Under 49 CFR 395.3 a driver's 14 hour window starts when they come on duty and keeps running while they wait, and once it closes they need 10 consecutive hours off before driving again. A layover is your charge when your delay closed that window. If the driver arrived with too little time left to finish the move anyway, the layover came from dispatch, and the on-duty start on the ELD is what proves which it was.

    See it on your freight

    Stop Overpaying On Freight Invoices

    Penny checks every invoice against your contracts and what the shipment actually did, then disputes what doesn’t hold up. You pay 30% of what she saves you, and nothing if she saves nothing.

    See how Penny works

    Found this useful? Share it with your team.

    Share on LinkedIn